Home > Windows 98 > Windows 98 Direct Cable

Windows 98 Direct Cable

I open a Windows 2000 "Command Prompt" window and run the command: "PING -t", where you get the DCC-host IP-address from the Details report above. network administrator tools Network Configuration Management Network inventory software Network Mapping Network monitoring / management Network Traffic Monitoring Patch Management Remote control software SharePoint Tools Software distribution and metering Storage and Networks ALL How-tos Win 10 Win 8 Win 7 Win XP Win Vista Win 95/98 Win NT Win Me Win 2000 Win 2012 Win 2008 Win 2003 Win 3.1 E-Home Office Once the above steps have been completed you must then decide what computer will be host and what computer will be guest. http://whatcamcorder.net/windows-98/windows-98-direct-cable-connection.php

Click Find. Sometimes a mix of DTE/DCE requires a pass-though cable (a serial gender changer can also be used). Since I have no DHCP on my network, and since my other systems use the TCP/IP subnet 192.168.1.x, I specified to use a range of IP-address. Unfortunately with legacy systems such as the (2) Windows 98SE systems I still run, (1) has no network card, and the (1) that does is not compatible with RJ-45 plugs, that http://www.computerhope.com/issues/ch000246.htm

If you open one box and look at the flat grey cable connecting HDD to motherboard, you should see one free plug. Then put everything you wish to transfer into that folder and copy it to PC 2Method 2:Use a 2 GB (or larger) USB memory key. C: drive) and click Properties. Windows will install the direct cable client when you click OK at the main Add/Remove Programs Properties window.

  1. Only consider tech support options that charge a one time - per incedent solved fee, as contrasted to a time based fee that could cost far more than what the feature
  2. In the Direct Cable Connection box choose Guest, choose the communications port, click Next to have the computer start searching.
  3. Privacy Policy | Cookies | Ad Choice | Terms of Use | Mobile User Agreement A ZDNet site | Visit other CBS Interactive sites: Select SiteCBS CaresCBS FilmsCBS RadioCBS.comCBS InteractiveCBSNews.comCBSSports.comChowhoundClickerCNETCollege NetworkGameSpotLast.fmMaxPrepsMetacritic.comMoneywatchmySimonRadio.comSearch.comShopper.comShowtimeTech
  4. Continue with OK, then NEXT.
  5. Here's how you set up BOTH your PCs to use DirectCC: 1.
  6. Now, right-click on the Users folder and select the New User command.
  7. Just continue with "Next" "Network Connection Type" : "What do you want to do" Select to : "Set up an advanced connection" Connect directly to another computer using your serial, parallel
  8. You may disregard this message, it should not affect your ability to transfer files over DCC.

If it isn’t there, you’ll need to install it.To install Direct Cable Connection, open Control Panel and double-click Add/Remove Programs. Then clear the User Must Change Password At Next Logon check box and select the Password Never Expires check box.For instance, my XP Guest computer is named Venus, so my example You can then close the Computer Management console and the Administrative Tools folder.Figure HYou’ll create a special user account for logging on to your Windows 2000/XP Host.Creating the Host connectionAfter you’ve However: the Password must match the password defined on the Windows95/98/ME DCC-host: either nothing or the password defined.

Install DirectCC.exe from the Communications category in the Windows Setup section of Add/Remove Programs under Control panel. WindowsNetworking.com is in no way affiliated with Microsoft Corp. Important Note: Both computers must have a different "Computer Name" and I have been informed they must share the same WORKGROUP." Now Share your file system. http://www.computing.net/answers/networking/direct-cable-connect-xp-to-windows-98se/51008.html That's if the software still exists and you can find a laplink cable.3) Alternatively, if it were me, I'd pull one of the drives out of the computer it's in and

Some are slow 4 bit ones and others support EPP operation. However, in Windows 2000, you have the option to rename the connection if you wish. Thank you all for your input:) Report • #12 Curt R June 22, 2013 at 06:28:40 Sorry I didn't reply for so long. It's a licensing cost issue for the CAD Programs.

This starts up the "Add Hardware Wizard". Windows ME Windows 98 Windows 95 Windows 3.x MS-DOS Step-By-Step Network Basics Trouble Shooting Exchange Server e-Mail Security e-Mail Spam ISA-Server Server Software Windows Security Featured Product Network Addons Report • #11 cantankerous9 June 16, 2013 at 19:45:12 Curt, sort of as per your suggestion, I did some online research and found a local Computer store that had an EX-Connect please, select : "Do not allow Virtual private connections" "User Permissions" You can specify the users who can connect to this computer.

If you are ready, click START-Control Panel and Double click the System icon. I'm sure you'd find some cheap. Copyright © 2014, TechGenix Ltd. d) Click OK to exit.

Windows performs some of the installation procedure following a restart, and combinations of more than one post update can cause trouble. For example, suppose you bring home a loaner laptop running Windows XP from the office and want to transfer some files to your home system running Windows 98. Any computer store will have cables especially made and will be called "Windows 95 / direct cable connect" or "interlink" compatable. As the New Connection Wizard suggests, you should use the computer name assigned to the host system to which this connection is intended to provide access.

Choosing your cableYou can use either a null-modem serial cable or a direct parallel cable to connect your computers together with the Direct Cable Connection utility. RSS Twiter Facebook Google+ Community Area Login Register Now Home Articles & Tutorials General Networking Windows XP Direct Cable Connection from Windows95 by Johannes Helmig [Published on 31 Aug. 2002 / Additional information How to copy information from one computer to another.

It does have USB ports, though whenever I attempt to connect my newer USB hardware, it prompts me to update drivers, which I cannot do unless I can download specifically from

Well, almost.Windows XP's Direct Cable Connection configuration and connection procedures have a few subtle differences that can make the operation a bit tricky. tab : DetailsIt will show you the IP-addresses,assigned to the Windows XP system( acting as the Server) and to theconnected client. All rights reserved. All Rights ReservedAd Choices The information on Computing.Net is the opinions of its users.

You should click CLOSE on the Direct Cable Connection box before unplugging or shutting down one of the computers. Make Sure You Have Performed Setup Procedure on BOTH Computers Select Host and Guest Computer Most people make notebooks the GUEST and desktops the HOST. The easiest is to purchase a dedicated software, e.g., LapLink (www.laplink.com), for the job. PLEASE NOTE: Each of the settings in this document are critical in getting direct cable connect to operate.

Therefore, if you select the parallel cable for linking two computers together via the Direct Cable Connection utility, you’ll definitely get much faster transfer performance.You can walk into any computer store click Ok, if Windows attempts to locate the drivers but is not able to, do this two times and reboot the computer again to ensure these settings are updated. Now start DCC on the guest by clicking CONNECT. (GUEST Computer Display) (GUEST Computer Display) (GUEST Computer Display) (GUEST Error Display) If you see the "Cannot connect to the host computer" Read More Check Object Replication Status across Active Directory Forest Tip explains how you can check object replication status Active Directory forest...

I have checked on cables to pull the drive and connect to the XP System, but they also don't seem to be backwards compatible to that OS. Now, select the Networking tab in the properties dialog box. Skip to Main Content Search Help Tips Dictionary History Forums Contact You are here: Help > Hardware Help > Serial port Setting up direct cable connection in Windows 95 and 98 As you may know, Microsoft included the NetBEUI protocol on the Windows XP CD.

If you get this error message, then you did NOT enable on the Windows95/98 DCC host system the Browse-Master (as part of the File-and-Printer Sharing). XP can read the older system files, but not visa versa. Copyright © 2014, TechGenix Ltd. Delivered Daily Subscribe Best of the Week Our editors highlight the TechRepublic articles, galleries, and videos that you absolutely cannot miss to stay current on the latest IT news, innovations, and

As you may know, the Direct Cable Connection utility isn’t designed to provide a simultaneous two-way communication channel as a standard peer-to-peer network connection would. Trouble? I have Laplink for Windows 3.11 (ha) and actually use that cable to connect the (2) Windows 98SE legacy systems, and it works with native Microsoft Windows 98SE software. It should display as part of your workgroup the Windows 9x DCC host system, which you then use to display the shared resources and their content.

Copyright © 2014, TechGenix Ltd. If the check mark is not apparent next to "Direct Cable Connection," click in the box then select OK. Once done, click Start, Programs, Accessories, Communications, click on Direct Cable Connection. Or, from the Network And Dial-up Connections window in Windows 2000, you'll click Make New Connection.

You’ll then need to add the IPX/SPX protocol.Installing Direct Cable ConnectionIf the Direct Cable Connection utility is installed on your Windows 9x/Me system, you’ll find it on the Start | Programs Here's how to always configure the Windows XP system as the guest and then configure the other versions of the Windows operating system as the host.What about Windows NT?