Home > Windows 98 > Windows 98 Direct Cable Connection

Windows 98 Direct Cable Connection

I originally purchased (2) licenses to run on the legacy systems, then another for the XP system. Computing.Net cannot verify the validity of the statements made on this site. Run Direct Cable Connection on both PCs from this program group: Win95 = Start\Programs\Accessories Win98 = Start\Programs\Accessories\Communications a) Set one computer as the Host and the other as Guest (as you If you intend to use DCC often, create a shortcut and drag it onto your desktop for convenience. check over here

via USB (Universal System Bus) : Networking via USB cableUSB Ethernet Adapters via Infrared port : Infra-Red Communication via Serial or Parallel cable : Direct Cable Connection When now using these When you see the Communications dialog box, locate and select the Direct Cable Connection check box from the Components list box and click OK twice. Email *Required Your Feedback *Required Please do not include any personal information including name, phone number and email address in your comments. To add NWLink IPX/SPX/NetBIOS Compatible Transport Protocol to Windows XP, click the Install button.

Therefore, you really have only a one-way communication channel where the guest computer can access any shared resources on the host computer, but the host computer can’t access resources on the c) Follow the instructions to finish configuring DirectCC and continue to start the connection process. 6) Repeat for DirectCC on the guest computer.... PLEASE REMEMBER that you have changed the default baud rate which is normally 19200 baud.

You may encounter other problems with your computer hardware such as the ports not being correctly configured, defective cable or other installed programs causing trouble. But HOW do I locate the hosts shared drive on> the guest machine?>> I have tried searching for other computers on the network, mapping> network drive using the host's computer name, Any computer store will have cables especially made and will be called "Windows 95 / direct cable connect" or "interlink" compatable. Please read our Privacy Policy and Terms & Conditions.

When using a DirectParallel Universal Cable, you can expect data transfer rates of between 300 KB and 500 KB per second.To achieve such high transfer rates, the DirectParallel Universal Cable employs In most cases, you make a direct cable connection with anull modem cable. Install DirectCC.exe from the Communications category in the Windows Setup section of Add/Remove Programs under Control panel. http://www.windowsnetworking.com/articles-tutorials/netgeneral/wxpdcc9i.html Your cache administrator is webmaster.

Tip explains how to get manually created replication connection objects in an Active Directory Forest... Serial users can increase their transfer rate to about 90K baud. Answer To setup, please refer to the procedure mentioned below [for the Infrared Connection (COM4)].Note that the following steps are the basics and the setting may vary depending on your environment. If everything is setup correctly, it will open a screen window that shows all the drives' names, which you can enter to access your data files and start your transfer....

If one of the computers is connected to a Microsoft networking LAN, enter your "Workgroup" name (this can be found by examining this panel on the LAN connected computer). http://www.computing.net/answers/networking/direct-cable-connect-xp-to-windows-98se/51008.html I am trying to transfer those older 3D designs for use on the newer XP system. Click START / Settings / Control Panel Click Add/Remove Programs and verify you have Direct Cable Connection Installed. How do I setup the Windows standard Direct Cable Connection (serial, parallel, and infrared transfers)?

Let us know.WesIn news:[email protected],Mav hunted and pecked:> Hi All,>> I am having a mental block!>> Direct cable connection between two machines (host - W98SE, guest> XP). Also availiable: Windows 95 to Windows 3.1 or DOS Instructions (Interlink) And: Windows 95 to Windows 3.11 (Remote Access Service) Conclusion: Connect ANY Windows Platform (Index to this Site) If your Important Note: Both computers must have a different "Computer Name" and I have been informed they must share the same WORKGROUP." Now Share your file system. This setting, if disabled, has been reported to prevent connection on later versions of Windows 95.

After the warning screen, go to the Bindings tab and deselect File and Print sharing for Microsoft Networks. In the Direct Cable Connection box choose Guest, choose the communications port, click Next to have the computer start searching. It is not important where on the desktop the ICON appears. Yes No I don't know View Results Poll Finishes In 8 Days.Discuss in The LoungePoll History About Us | Advertising Info | Privacy Policy | Terms Of Use and Sale |

Other ideas are listed on the FAQ page for this document. (GUEST Computer Dialogue Box) Enter the "Computer Name" you assigned for the Host computer. DCC may operate using two printer ports, or two serial, a mixture of serial and parallel will not work and may cause damage to the printer port in extreme cases. Direct Cable Connection to NT 4 Workstation Direct Cable Connection.

thename of the Windows XP system accepting the incoming connection.(the name is defined on Windows XPin the Properties of "My Computer" ) If somebody got the connection to work from Windows95

Connect it to the PC with the files you need to transfer. Microsoft has updated the rasapi32.dll some time ago to correct problems related in this area. Since RAS is a completely different animal, I won’t be covering it in this article. The leading Microsoft Exchange Server and Office 365 resource site.

Launch the "Direct Cable Connect" utility in windows 95 (It is probably in the "Accessories" menu.) Click Change If the port you are using does not appear, click the "Install New We are Done With the Control Panel. Tip explains how to get manually created replication connection objects in an Active Directory Forest... tab : DetailsIt will show you the IP-addresses,assigned to the Windows XP system( acting as the Server) and to theconnected client.

Of course that would still be the easiest solution, but newer systems don't have serial ports, and the cable won't work thru docking station adapters.Actually no. All rights reserved. To complete the operation, click Create. The system returned: (22) Invalid argument The remote host or network may be down.

Example: share name for drive c: in this example is DRIVE_C. Notebook computers can be used anywhere. Then, click [Start]->[Program]->[Accessories]->[Communications], and click [Direct Cable Connection]. Latest Contributions About the new Windows XP Professional Logon Screen : New XP style or NT4/2000 style 1 Dec. 2003 Windows 2000 DCC and ICS 27 Nov. 2003 Windows 2000 /

Do you want to restart your computer now?" Click [Yes]. The View Host feature will not work correctly if the "Cannot Find Host Computer" error occurred, and you will have to use windows explorer to access the remote.