Home > Could Not > Windows Could Not Start The Windows Management Instrumentation Service Error 2

Windows Could Not Start The Windows Management Instrumentation Service Error 2

Contents

being careful this time about what I had it block. The error was something like "Can't Collect Information Cannot access the Windows Management Instrumentation software. Microsoft cannot guarantee that these problems can be solved. The processor and Installed Memory fields were returning ‘not available'. this content

Exit one or more 16-bit programs, or increase the value of files in your Config.sys file." The only time that this issue shows... Reply OuttoSeaandOverboard says: 11/16/2007 at 9:35 pm hey what how do you do get to the System32WbemRepository folder. Here are the detailed steps: 1. Disable and stop the Windows Management Instrumentation service. 2.

Error 126 The Specified Module Could Not Be Found

Again, I am only noticing things now that I am looking for them.. I check for malware frequently, using both Malwarebytes and superantispyware.. After a reboot the windows management is forced to create a new database clearing out the error. Note:The Windows Management Instrumentation service starts automatically when you restart the computer.

Right-clickCommand Promptand selectRun as Administrator. 3. If I try to install a driver and not all of the driver files are present, I will get the error message "The system cannot find the file specified." But the This could be due to a badly installed version of WinMgmt, WinMgmt repository upgrade failure, insufficient disk space or insufficient memory. I constantly (roughly every 10ms) receive an error in Event Viewer Screenshot: http://i.imgur.com/rF8Voi1.png "The WinPcap Packet Driver (NPF) service failed to start due to the following error: The system cannot find

Thank you SO much!! Reply nate says: 8/25/2006 at 10:29 pm Thanks Mark. I can uncheck that, but it stays as read only.. What other symptoms apart from not being able to update are you seeing?

ERROR: WMI MONIKER CONNECTION errors occured for the following namespaces: .......................................... 1 ERROR(S)! .2011 14:30:54 (0) ** - Root, 0x8007007E - The specified module could not be found.. .2012 14:30:54 (0) Took us a while to figure out this is WMI related. Reply TBoud says: 7/9/2012 at 2:09 pm "Windows Management Instrumentation software. General Discussion Error from Service Control Manager - system cannot find the fileHello!

  • Wang!
  • Every mof file failed "An error occurred while opening the namespace for object 1 defined on lines xx - xx: Error Number: 0x8007007e, Facility: Win32 Description: The specified module could not
  • JoinAFCOMfor the best data centerinsights.
  • Once in this folder del *.* and del FS.
  • Sunday, January 27, 2013 9:04 PM Reply | Quote Microsoft is conducting an online survey to understand your opinion of the Technet Web site.
  • I wonder how my registry got screwy in the first place..?
  • I haven't specifically noticed any problem until now.
  • I did not reinstall Norton's because it has never been good software and I should have known better when I put it on my computer this last time.

Wmi Service Failed To Start

Reply nate says: 12/22/2006 at 4:24 pm my pleasure. https://www.404techsupport.com/2012/11/wmi-commands-result-in-the-specified-module-could-not-be-found/ It goes to show that you can't dismiss older posts as relevance doesn't have time frames. ~ Tamra Reply nate says: 7/2/2009 at 3:15 pm Outstanding writeup Tamara. Error 126 The Specified Module Could Not Be Found In the Command Prompt, typecd %windir%\system32\wbemand press Enter. 4. Windows Error 126 If you have any other dependencies listed, then it may be the causing the problem.

Reply Got something to say? news This means you have the WMI, but it just needs to be registered. He also does miles and point hacking to enable cheap travel for his family. This solution is still working (May 2009) since you published this in 2006.

I am not bound to succeed, but I am bound to live by the light that I have. Cheers to you Nate for the WMI fix post! Log In or Register to post comments Please Log In or Register to post comments. http://whatcamcorder.net/could-not/tex-error-could-not-start-command.php Click Start, Run and type Regedit.exe Navigate to the following location HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services\ winmgmt Double-click DependOnService and set it's Value data to RPCSS Close Regedit and

I changed the "Locations" to my 1TB HDD. You can even run ERUNT manually to create back-ups when you want to, like before you install crapware. Reply Anonymous says: 11/23/2007 at 7:20 pm I tried to follow all of these tutorials, but I cant even find the repository folder.

Log In or Register to post comments Anonymous User (not verified) on Feb 4, 2005 Worked for me.

Here's an excerpt from Windiag 2.1 This instance of Windiag started logging at line .1895 and was normal until the following: .2010 14:30:54 (1) !! In System Configuration please go to Services tab and locate Windows Management Instrumentation. I have been fighting this error for months. Performance & Maintenance the system cannot find the file specifiedHi.....an error "the system cannot find the file specified" occured when i was trying to run a setup.exe to setup the microsoft

Error 2: The system cannot find the file specified" I have tried the Microsoft FixIt and the Fix Windows Update utility from TheWindowsClub.. After that, type the commandwmiprvse /regserverand press Enter. 7. BTW, I have tried many tricks discovered from internet world for solution, but all not luck for me, I'm looking forward to see the solution from this kindly forum for my check my blog Glad I could be of some help. :) Reply Michelle says: 11/16/2007 at 9:39 am Hi, Nate.

Windows 7: BITS Error 2: The System cannot find the file specified Page 1 of 6 1 23 > Last » 28 Aug 2012 #1 3DPiper Windows 7 93 posts The computer was set to have a printer installed through the AD security group-based network printer install shutdown script I wrote. DON'T!!!!! How can I resolve this error?

After that, type the commandwmiprvse /regserverand press Enter. 7. God bless! :) Reply 1centwiz says: 5/8/2009 at 3:54 pm Thanks Nate! Please tell me how to find the repository folder, or a solution to my problem. First be sure the windows management service is stopped.

This site also uses Skimlinks for smart monetization of other affiliate links. If the issue persists, please re-register WMIDLL files and re-compile WMImof files to check if the issue can be resolved. I think the last successful update was a month ago What other symptoms apart from not being able to update are you seeing? Reply paul says: 1/24/2008 at 10:57 pm To everyone, I already solved my problem, just check this site out.

Start the Windows Management Instrumentation service and change the Startup Type back to Automatic. I received what I like to call a "pile of symptoms" and get to try to find the root cause. Computerstepbystep Computer Maintenance Infected Pc Installations Download Donate Computer step by step Make your Pc better How to Start/Stop Windows Management Instrumentation service Description Services Regedit Back CMD Msconfig Service The files that were deletedwill bere-created when the computer restarts.

Links Winhelponline.com WinXPTutor.com The Winhelponline Blog Unable to start the Windows Management Instrumentation (WMI) service? You wouldn't believe how popular this post actually is and it's 5 years old now. How can I resolve this error? The first technician to respond also noted that when looking at the Computer properties, it would return ‘not available' for the "Processor:" and "Installed memory (RAM):" fields.

All rights reserved.Newsletter|Contact Us|Privacy Statement|Terms of Use|Trademarks|Site Feedback {{offlineMessage}} Try Microsoft Edge, a fast and secure browser that's designed for Windows 10 Get started Store Store home Devices Microsoft Surface PCs That worked! The Windows Management Instrumentation (WMI) service is returning an error related to initialization of core parts.